background image

MA430-en-GB_V1.3   10/16 

Maintenance 

WARNING: 

To avoid electrical shock, disconnect the meter from any circuit, remove the test leads 

from the input terminals, and turn OFF the meter before opening the case. Do not operate the meter 
with an open case. 

Cleaning and Storage 

Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or  
solvents. If the meter is not to be used for 60 days or more, remove the battery and store it 
separately. 

Battery Replacement 

1.  Remove the Phillips head screw that secures the rear battery cover 
2.  Open the battery compartment 
3.  Replace the 9V battery. 
4.  Secure the battery compartment door 

 

Never dispose of used batteries or rechargeable batteries in household waste. 
As consumers, users are legally required to take used batteries to appropriate 
collection sites, the retail store where the batteries were purchased, or wherever 
batteries are sold. 

Disposal: 

Do not dispose of this instrument in household waste. The user is obligated 

to take end-of-life devices to a designated collection point for the disposal of electrical 
and electronic equipment.  
 

Other Battery Safety Reminders 

o

  Never dispose of batteries in a fire. Batteries may explode or leak.

 

o

  Never mix battery types. Always install new batteries of the same type.

 

 

 
 

Содержание MA430











Отзывы: