![background image](http://html.mh-extra.com/html/extech-instruments/lt45/lt45_user-manual_2453049005.webp)
5 LT45-en-US_V2.1 6/20
MAX/AVG/MIN Memory Mode
The meter can record the maximum, minimum, and average readings as described below:
1.
Momentarily press the MAX/AVG/MIN
button and the meter will begin to track the
indicating that the meter is now displaying the minimum reading. The reading will not
change until a lower reading is registered.
2.
Press the
3.
Press the
show the average of the readings taken since the
icon will be displayed.
4.
Press the
To exit this mode, press and hold the
button for at least 2 seconds. The MAX/AVG/MIN icons
should all be switched OFF when the unit returns to the normal operating mode.
Memory Record/Read Mode
1.
Momentarily press the
Mem/Read
button to store a reading. The LCD will display a small M
icon on the lower left-hand area of the LCD along with the memory location number (1 to
99) representing the storage location for the recorded reading. Up to 99 readings can be
stored.
2.
To review (read) the stored readings, press and hold the
Mem/Read
button until the MEM
icon appears at the top of the LCD. Now use the arrow buttons to scroll through the stored
readings. The
lower left-hand corner of the LCD while the main display digits show the stored reading for
the selected memory location.
3.
To store an average (AVG) reading, first access the AVG mode (See MIN/MAX/AVG section of
this guide) and while an average reading is displaying (AVG icon switched ON), momentarily
press the
Mem/Read
button for one second. The LCD will display AVG M and the memory
location number (1 to 99) indicating that an average reading has been stored in the
numbered memory location.
4.
When a stored reading is an AVG value, the screen will display AVG on the lower left-hand
corner.
5.
Momentarily press the
Mem/Read
button to exit the Memory mode and return to the
normal operating mode.
6.
To clear all 99 memory locations: With the meter switched OFF, press and hold the
Mem/Read
and
On/Off
buttons simultaneously for two seconds. The meter will switch ON
and the screen will display CLr
all of the 99 memory locations have been
erased.
Data Hold
Press the Hold button to freeze the displayed reading (the HOLD icon will switch ON). Press the
button again to release the held reading
con will switch OFF).
www.
.com
1.800.561.8187