380976 V3.2 4/11
3
Warranty
EXTECH INSTRUMENTS CORPORATION
warrants this instrument to be free of defects in parts
and workmanship for
one year
from date of shipment (a six month limited warranty applies to
sensors and cables). If it should become necessary to return the instrument for service during or
beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext. 210
for authorization or visit our website www.extech.com for contact information. A Return
Authorization (RA) number must be issued before any product is returned to Extech. The sender is
responsible for shipping charges, freight, insurance and proper packaging to prevent damage in
transit. This warranty does not apply to defects resulting from action of the user such as misuse,
improper wiring, operation outside of specification, improper maintenance or repair, or unauthorized
modification. Extech specifically disclaims any implied warranties or merchantability or fitness for a
specific purpose and will not be liable for any direct, indirect, incidental or consequential damages.
Extech's total liability is limited to repair or replacement of the product. The warranty set forth above
is inclusive and no other warranty, whether written or oral, is expressed or implied.
Safety Information
•
Read the following safety information carefully before attempting to operate or service the
meter.
•
To avoid damage to the instrument do not exceed the maximum input limits shown in the
technical specifications.
•
Do not use the meter or test leads if they appear damaged.
•
Use extreme caution when working around bare conductors or bus bars. Accidental contact
with the conductor could result in electric shock.
•
Use the meter only as specified in this manual; otherwise, the protection provided by the
meter may be impaired.
•
Read the operating instructions before use and follow all safety information.
•
Use caution when working with voltages above 60VDC or 30VAC RMS. Such voltages
represent a shock hazard.
•
Before taking resistance measurements or testing continuity, disconnect the circuit under test
from the main power supply and remove all loads from the circuit.
Safety symbols
Caution! Refer to this manual before using the meter.
Dangerous voltages.
Meter is protected throughout by double insulation or
reinforced insulation.
When servicing, use only specified replacement parts.
Complies with EN-61010-1, IEC 1010-2-32
