13 EX540-EN V1.2 7/10
BATTERY INSTALLATION
WARNING
: To avoid electric shock, disconnect the test leads from any source of voltage
before removing the battery cover.
1. Turn power off and disconnect the test leads from the meter.
2. Open the rear battery cover by removing two screws (B) using a Phillips head
screwdriver.
3. Insert the battery into battery holder, observing the correct polarity.
4. Put the battery cover back in place. Secure with the screws.
5.
You, as the end user, are legally bound (
EU Battery ordinance
) to return all used
batteries,
disposal in the household garbage is prohibited!
You can hand over
your used batteries / accumulators at collection points in your community or
wherever batteries / accumulators are sold!
Disposal:
Follow the valid legal stipulations in respect of the disposal of the device
at the end of its lifecycle
WARNING:
To avoid electric shock, do not operate the meter until the battery cover is in
place and fastened securely.
NOTE:
If your meter does not work properly, check the fuses and batteries to make sure that
they are still good and that they are properly inserted.
A
A
A
B
B
F1 F2
