BR200-BR250-EU-EN v7.4 2/14
4
Installation
Install the batteries into the instrument body, charge the monitor battery, connect the camera and
flexible tube to the body, and insert the micro SD card. Install any accessory as needed.
Battery Installation
Connect Monitor Power
The monitor has a rechargeable battery. Plug in the AC adaptor and connect the cable to the
DC5V
socket on the monitor. The power indicator will light in red (or the battery capacity icon on
LCD of monitor will blink, indicating that it is charging - and will turn off after a full charge)
Connect the camera and flexible tube
Connect the camera tube to the instrument body; ensure that the keyed ends are properly aligned.
Once aligned, tighten the knurled knob to hold the connection firmly in place.
Warning.
Permanent damage to the flex tube and loss of operation will occur if the flex
tube is subjected to narrow radius or sharp angle bends.
Inserting the micro SD card
Insert card with arrow pointing toward slot. Gently apply pressure until card locks into the spring
loaded slot. To remove from unit, gently push the card inward and then release to eject it from the
card slot. Please use Class 6 (or higher) TF Flash memory card.
