BR150-EN V1.3 11/12
4
Installation
Install the batteries into the instrument body, charge the monitor battery, connect the camera and
flexible tube to the body, and install any accessory as needed.
Battery Installation
1.
Remove the screw and cover from the base of the handle.
2.
Slide out the battery compartment.
3.
Replace the four AA batteries observing polarity
4.
Reinstall the battery compartment, cover and screw.
Connect the camera and flexible tube
Connect the camera tube to the instrument body; ensure that the keyed ends are properly aligned.
Once aligned, tighten the knurled knob to hold the connection firmly in place.
Warning.
Permanent damage to the flex tube and loss of operation will occur if the flex
tube is subjected to narrow radius or sharp angle bends.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
