461893-EN V1.4 8/13
4
Memory Record and Recall
The meter automatically records the Minimum and Maximum readings. These represent the lowest
and highest readings measured from the moment the Measure button is pressed to the moment it is
released. The Last reading is also recorded; this is the last measurement taken before the Measure
button is released. These stored readings can be displayed on the LCD using the Memory button as
described below:
1. Press once and hold: The Last reading is displayed followed by "LA"
2. Press again and hold: The Maximum value is displayed followed by the word "UP"
3. Press again and hold: The Minimum value is displayed followed by "dn"
Special Measurement Considerations
1. The non-reflective area of the object under test must always be greater than the reflective tape
area.
2. If the shaft of the object under test is reflective, it should be covered with black tape or paint
before attaching reflective tape.
Battery Replacement
The low battery indication appears as "LO" on the display. To replace the batteries:
1. Slide the rear cover off the battery compartment in the direction indicated by the arrow.
2. Replace the four 1.5V 'AA' batteries and the battery compartment cover.
3. Remove the batteries if the instrument will be stored for long periods of time.
www.
.com
1.800.561.8187
