Operation
Turn Power ON
Press the power button to turn power on. The meter will perform a short self-test.
A. Airflow
Measurements
1. Press
the
Function
button to select the Anemometer function. In Air
Flow mode, the display will show Air Velocity and Temperature.
2. Press
Unit
button to select desired unit of measure (FPM, MPH,
KNOT, KM/H, or M/S)
B. %RH
Measurements
1. Press
the
Function
button to select %RH function. In %RH mode, the
display will show %RH and Temperature.
2.
Press the °
C/°F
button to select the desired temperature unit of
measure.
C. Temperature
Measurements
1. Press
the
Function
button to select the Temperature function. In
Temperature mode, the display will show only temperature.
2.
Plug the thermocouple into the meter's thermocouple input jack. If no
thermocouple is connected, or if the thermocouple is defective, the
meter will display “
-----
“. (Primary display temperature will only work if
a thermocouple is connected).
MIN, MAX, Recording Function
Press the
Max/Min
button to begin capturing the Minimum (MN), and Maximum (MX),
values. Press the
Max/Min
to view maximum and minimum recorded readings, Press and
Hold the
Max/Min
button until the display returns to standard operation to exit the Max/Min
function.
Data Hold
Press the
HOLD
button to freeze the reading in the display. The 'HOLD' icon will appear on
the upper right-hand side of the display. Press the HOLD button again to return to normal
operation (the 'HOLD' hold icon will disappear).
Auto Power OFF
The meter will automatically turn off after 10 minutes if no keys are pressed during this
period. Auto power off is disabled in the max/min recording mode.
Turning Power OFF
Press the power button to turn power off.
