Model 42582 Version 6.0 Sept 2007
6
Viewing Stored Readings
1.
From the WECLOME screen, press the
F2
MEM
softkey
to scroll through the memory locations and view the stored data.
3. Press
the
F1
EXIT
softkey to return to the WELCOME screen.
Printing Stored Data
1. Press
F2
MEM
from WELCOME screen to proceed to Manual Datalogger screen 1.
2. Press
F4
NEXT
to proceed to Manual Datalogger screen 2.
3. Use
the
Arrow keys
to scroll to a memory location
4. Use
the
F3
PRN
softkey to print a data record.
Erasing Data
1. Press
F2
MEM
from the WELCOME screen to go to Manual Datalogger screen 1.
2. Press
F4
NEXT
to proceed to Manual Datalogger screen 2.
3. Use
the
Arrow keys
to scroll to a memory location.
4.
Momentarily press the
F2
CLR
softkey to erase the selected memory location.
5.
Press and hold
F2
CLR
to erase all readings in the Manual datalogger. Answer YES
when prompted to erase ALL recorded readings. Press NO to abort.
6. Press
F1
EXIT
to return to the WELCOME screen.
Customizing a Memory Location Header in the Manual Datalogging mode
The Header for each Memory location is the Date and Time stamp. To customize a
header, follow the steps below:
1. Press
F2
MEM
from the WELCOME screen.
2. Use
the
Arrow keys
to select a memory location.
3. Press
F3
EDIT
to begin editing.
4. Use
the
Arrow keys
to step forward and backward in the header line (characters will
not be erased)
5.
Use the
F3
BACK
softkey to step backward (erasing characters while stepping).
6. Use
the
Alphanumeric keypad
to compose a header. For example, press the ‘2’ key
and a window with the characters related to the ‘2’ key will appear (namely, 2abcABC
as shown in the diagram). Then use the ‘2’ key again to scroll through the character
list. When the desired character is highlighted the meter will automatically place that
character in the header.
7. The
F2
CLR
softkey is used to erase the header.
8. The
F4
ENTER
softkey is used to save the header.
01:
T: 82.0l F
o
ABORT
ENTER
CLR
HEADER EDITING
BACK
2abcABC
