Extech Instruments 382152 Скачать руководство пользователя страница 2

Model 382152    Ver. 1.6    April 2001 

2

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects 
in parts and workmanship for one year from date of shipment (a six month limited 

w arranty applies on sensors and cables). If it should become necessary to return the 

instrument for service during or beyond the warranty period, contact the Customer 

Service Department at (781) 890-7440 for authorization. A Return Authorization (RA) 
number  must be issued before any product is returned to Extech. The sender is 

responsible for shipping charges, freight, insurance and proper packaging to prevent 

damage in transit. This warranty does not apply to defects resulting from action of the 

user such as misuse, improper wiring, operation outside of specification, improper 
maintenance or repair, or unauthorized modification. Extech specifically disclaims any 

implied warranties or merchantability or fitness for a specific purpose and will not be 

liable for any direct, indirect, incidental or consequential damages. Extech's total liability 
is limited to repair or replacement of the product. The warranty set forth above is 

inclusive and no other warranty, whether written or oral, is expressed or implied. 

 

Safety 

Please read the following safety information carefully before attempting to operate the 
meter and use the meter only as specified in this manual. 

Environmental safety information 

• 

Do not use meter outdoors when precipitation is likely 

• 

Installation Category III 

• 

Pollution degree 2 

• 

Altitude: 2000 meters max. 

• 

Ambient conditions: 32 to 104

o

F (0 to 40

o

C); RH: 80% max 

• 

Observe the following international safety warning symbols

 

Safety Symbols

 

 

Caution: Refer to this manual before using this meter 

 
 

Dangerous Voltages 

 
 

Meter is protected throughout by double or reinforced insulation

 

Organizations that provide rules and guidelines for proper grounding 

• 

The National Electrical Code (NEC) 

• 

Underwriters Laboratories (UL) 

• 

National Fire Protection Association (NFPA) 

• 

American National Standards Institute (ANSI) 

• 

Occupational Safety Health Administration (OSHA) 

• 

Telecommunications Industry Standard (TIA) 

 

Содержание 382152







Отзывы: