To stow the bed cover in the open position,
make sure the middle clamps are latched
and secure. Snap both cab tie down straps
into the front cover clasps.
To stow the bed cover in the fully open and upright position,
detach and stow the middle clamps into their pockets.
Raise the cover to vertical. Use the roll bar straps to wrap
tightly around the roll bar. Snap the strap back into the
cover clasp. Tighten the straps.
NOTE: To order replacement parts, contact the
Customer Service Department for assistance at 800-877-2588.
When ordering, xxx represents the 3-digit suffix,
as referenced on the sales receipt or vehicle application list.
An asterisk, *, requires more information such as the
year, make, model, bed size or driver / passenger side.
Replacement Parts
Cab Rail Seal 32563200
Cab Buckle Kit 54560402
Mounting Clamp Kit
22830010
Hinge Seal
32560669C
Hinge
Bracket
31831030
Hinge
Cap
35830020
32560368
Side
Rail
Seal
Tail Rail Seal 32563200
Tail Rail Seal for Polaris Ranger 1000- 32000120
Latch Pocket Cover 35830100
Cab End Tie Down
Strap Kit 1015
Roll Bar
Tie Down
Strap Kit
54830010
Tail
Clamp
Bracket
31832200
Hold Down
Clamps
1042
Cleat Kit
31831025
Tail Panel
83xxx-62
Cab Panel
83xxx-60
Hinge
15832167
*
*
For XP1000
models remove
the installed tail
seal, and replace
with the
32000120
seal.
Install the seal by hooking one side,
then clipping the other side over the edge.
