EXT Racing Shox ARMA V3, Руководство по обслуживанию

Страница: 37 / 54

Service manual Arma v3 / Storia v3 [V1.5]
#12 - Rebound needle
is now o the damper.
Remove the adjustement,
clean it a reasssembly the
clicker mechanism with
some fresh grease. Set
the clicker at 7 clicks
from fully closed.
ˆ EXT Yellow
grease
ˆ Clean tray
#13 - Grease and change
orings on rebound need-
le and piston holder. In-
sert the rebound needle
in the piston holder ju-
st a little inside.Put a
small amount of primer
and then Loctite green
2701 on the piston-holder
shaft. (Previously well-
cleaned, as the internal
thread of the shaft) and
screw it to 10Nm.
ˆ TL0425
ˆ Torque
wrench 10Nm
ˆ Loctite green
2701
ˆ Primer Locti-
te 7649
ˆ Service kit ty-
pe "A"
#14 - Change the old
oring and slydering on
the IFP, replace them
with new ones from the
service kit. Previously
grease components before
installing them.
ˆ Red adhesive
Gel
ˆ Service kit ty-
pe "A"
35