20
English
EX
-
6128PoE
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
6. VCOM Admin Utility
Since the EX
-
6128PoE was shipped with DHCP mode enabled, an IP address is required to con-
figure it. By default, the EX
-
6128PoE automatically receives an IP address from a DHCP server
(e.g. your router). If it is not connected to a DHCP server, use the default IP address: 192.168.2.1.
To determine the IP address, you must install the VCOM Admin Utility (
vspsetup.exe
) that comes
with the device. The installation program is located on the driver CD included in the scope of deliv-
ery in the following folder.
Attention!
Please run the installation program with right click "Run as administrator!
1. Get the IP address:
Start the VCOM Admin Utility (right
-
click on the VCOM Admin Utility
shortcut on the Windows desktop and start this with
„
Run as Administrator
“).
Click
Remote Device Management
>
ADD Device
>
Search
After the EX
-
6128PoE was found, click
Cancel
to abort the search.
Click
OK
, to add the EX
-
6128POE.
