18
English
EX
-
6118
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
2.
Now use an Ethernet cable and connect it to the RJ45 port of the EX
-
6118 and the other end to a
PC or a switch.
3.
Now connect your serial devices to the 9 pin D
-
SUB connectors of the EX
-
6118.
4.
Now connect the 12V power supply which is included in the extend of delivery to the 12V socket
provided for this purpose on the EX
-
6118. As soon as this LED is steady on, the device is ready
for operation.
4. Hardware Installation
Please observe the following installation instructions. Because there are big differences between
PC's, we can only give you a general guide for connecting the EX
-
6118. If you have any questions,
please refer to the operating instructions of your computer system.
1.
Install the EX
-
6118 on a mounting rail by using the optional DIN rail kit or on a wall.
Holes for Wall Installation
