Dual Channel Gigabit Ethernet PCIe Card, w/ 4KV Isolation
2
Due to the hot-plug feature of the PCI Express, the installation of the PCIe Dual
Channel Gigabit Ethernet card is quite straightforward.
1.
Turn the system power OFF before installation!
2.
Use static electricity discharge precautions. To avoid damaging any
components on the card, handle it by edges.
3.
Remove the chassis cover from your computer
4.
Locate an unused PCI Express slot (typically white and smaller) and remove
the corresponding slot cover from computer chassis.
5.
Plug the Dual Channel Ethernet PCIe card to the unused PCI Express
expansion slot and attached the I/O card bracket to the computer chassis
screw.
6.
Put the chassis cover back on the computer.
7.
Turn ON the power of your computer and peripherals.
8.
Proceed with Software Driver Installation.
9.
Installing LAN cables
Each RJ45 has its corresponding LED indicator. Connect the Cat5 LAN cables
to both RJ45 connectors. The corresponding
‘
LINK(ACT)
’
LED will light if link is
on. The same LED will flash when transferring data. This following table lists
the LEDs
’
definition:
LED Name
Color
LED Function
LINK(ACT)
Green
Steady on:
Linked
Blinking:
Transferring Data
3. Installing the Gigabit Ethernet PCIe Card
