Exsys EX-3517R, Руководство пользователя

Страница: 2 / 8

4-Port SATA3 Hardware RAID PCIe (x2) Card
2
1. Power down the peripherals, then the computer.
2. Remove the computer cover and save the screws.
3. Choose an unused PCI Express bus slot.
4. Unscrew and remove the slot cover. Retain the screw; you will use it when you
install the SATA3 PCIe RAID Card.
5. Place the SATA3 PCIe RAID Card into the slot. Carefully press the board into
the slot until it seats firmly.
6. Secure the SATA3 PCIe RAID Card with the slot cover screw.
7. Install the internal SATA cables from the SATA connectors of the PCIe RAID
Card to your SATA hard drives.
8. Carefully reinstall the computer cover. Insert and tighten the computer cover
screws.
9. Power up the PC and observe the monitor. The BIOS lists all Serial ATA hard
drives attached to the SATA3 PCIe RAID Card. For example:
If the information displayed on your screen is correct (the installed devices are
listed with the correct device name, etc.), congratulations! You have
successfully installed the SATA3 PCIe RAID Card in your computer.
3. Hardware Installation
Asmedia 106x SATA Controller Ver 1.50 AHCI Mode
Copyright (C) Asmedia Technologies, Inc. All Right
reserved. S.M.A.R.T. Supported
Using PCIE Gen2 x2
Firmware version 150910_00_00_00
Port PMP Model
0 0 KINGSTON SHFS37A120G
SATA3
4 0 KINGSTON SHFS37A120G SATA3
5 0 ST3000DM001-9YN166 SATA3
6 0 ST3000DM001-9YN166 SATA3