15
EX
-
1526HMVS
English
6. Managment Software
After the driver installation is complete, you can now install the management software to access
the EX
-
1526HMVS remotely. Now insert the driver CD in your CD
-
ROM drive (e.g. Drive D:) and
run
„
EXSYS_USBCTL
-
R1.03_Setup
“
which located in the
„
Windows
“
folder (see picture):
Follow the installation instructions and complete the installation.
Now you can open the management software via the desktop icon.
Important!
Start the program by right
-
clicking "Run as Administrator"!
Click on the "
Auto Search
" button to automatically search for the installed hub or enter the COM
number in the field (
1
), under which the hub is registered under Ports (COM & LPT) and click on
the "
Search by Control Port
" button. Now the software should find and display a hub. The soft-
ware will display additional information about the hub, such as COM number (which hub), number
of ports, which ports are active, which ports are inactive and which firmware version is installed
(see picture).
1
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
