11
EX
-
1196HMS
English
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3. Layout, Connections & Jumper Settings
3.2
Connections
USB 3.1 (Gen1) C
-
Port:
Note!
By dual assignment of the pins, the USB Type
-
C plug can be plugged into the port on both
sides.
The EX
-
1196HMS comes with the setting Self
-
Power. You also have the possibility
the EX
-
1196HMS to supply Bus
-
Power. For this you open the case with the two
screws on both sides. Then you must set the jumper JP1 from DIS (Disable) to ENA
(Enable). See the following picture.
3.3
Jumper Settings
JP1
ENA
DIS
