10
English
EX
-
1188HMS
-
2
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3. Layout, Connections & Jumper Settings
3.2
Connections
USB 3.1 (Gen1) B
-
Port:
D
-
GND
StdB_SSTX
-
Std
GND_DRAIN
St
StdB_SSTX
-
D+
VBus
Attention!
Never plug in with force
or in wrong direction.
Attention!
Never plug in with force
or in wrong direction.
USB 3.1 (Gen1) A
-
Port:
StdB_SSTX
-
St
GND_DRAIN
VCC
Std
StdB_SSTX
-
D+
D
-
GND
3.3
Jumper Settings
The EX
-
1188HMS
-
2 will be delivered with the setting Bus
-
Power.
But you have the
possibility to cut the power at the data line.
For this you open the case with the four
screws on both sides. Then you must set the jumper JP4 from E (Enable) to D
(Disable). See the following picture.
JP4
D
E
