11
EX
-
1112HMS
English
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3. Layout, Connections & Jumper Settings
3.2
Connections
USB 3.1 (Gen1) B
-
Port:
D
-
GND
StdB_SSTX
-
Std
GND_DRAIN
St
StdB_SSTX
-
D+
VBus
3.3
Jumper Settings
The EX
-
1112HMS comes with the setting Self
-
Power. You also have the possibility
the EX
-
1112HMS to supply Bus
-
Power. For this you open the case with the two
screws on both sides. Then you must set the jumper JP1 from DIS (Disable) to ENA
(Enable). See the following picture.
Attention!
Never plug in with force
or in wrong direction.
JP1
ENA
DIS
