KGC320/90-5A++
EN
Seite
12
von
28
Version E1.0 12/2015
6.1 Switching on the appliance
The refrigerator shall stay for half an hour before connecting 220-240 /50Hz power
when it is firstly started.
The refrigerator shall run 2 to 3 hours before loading fresh or frozen foods; the
refrigerator shall run for more than 4 hours in summer in advance considering that the
ambient temperature is high.
6.2 Setting temperature
Switch on the appliance with the On/Off button.
The temperature display indicates the set temperature.
The appliance begins to cool. Light is switched on when the door is open.
We recommend a factory setting of +4 °C in the refrigerator compartment.
Do not store perishable food warmer than +4 °C.
Temperature control is for regulating temperature of appliance constantly. It is
regulated by a wheel button. Settings 1
– 7 regulate the different values of temperature
within the appliance. Settings:
Setting 1: Lowest freezing, highest temperature, warmest setting
Setting 7: Highest freezing, lowest temperature, coldest setting
Set temperature control to setting 3. This setting is best for an ambient temperature
range from +20 °C to +25 °C for private and office use.
Depending on ambient temperature, location of appliance or frequently opened door,
you may adjust setting of temperature control.
If there is no fresh food, run appliance in storage mode.
6 hours before freezing fresh food (max. 20 kg) set appliance to freezing mode. After
24 hours press push-button switch again to reset to storage mode.
Note
Appliance set in freezing mode has a higher energy consumption. Therefore, change
setting to storage mode (by pressing push-button switch) as soon as required
temperature has been reached. 48 hours after setting to freezing mode it will be reset
to storage mode automatically.
