page | 22
EN
Compose the blender
6.
Unpack the unit and spread all parts on a horizontal surface before the
first use.
7.
The parts (measuring cup, lid, gasket, glass, knife drive) are already
installed in the drive unit. Take the various parts apart, wash and dry
these.
8.
Once all parts are cleaned and dry, mount it back together. Put the
blender container on a flat surface, hold the blender container grip, put
the seal ring, the knife and the knife drive in the opening at the bottom
of the drive unit and fasten, by rotating counterclockwise (see fig. 1)
9.
Place the mixing bowl with the opening up and then put the safety lid
on the jug. Put the lid insert in the opening of the safety cover and turn
the jug clockwise until it is tightened. (see fig. 2)
10.
Finally, mount the mounted blender jug to the drive unit (see fig.
3)
Fig. 1
Fig. 2
Fig. 3
