Express Water Whole House, Руководство по установке системы

Страница: 10 / 16

10
After shutting off the main water line open all of your home plumbing fixtures to drain as much water
as possible and reduce pressure in your plumbing.
Prepare Your Install Site
Y our install location should be at any point after the main water supply line enters your home, but
before the line splits or meets the hot water heater. If your line branches off to outdoor and indoor
plumbing you may wish to install on the indoor line if you would only like to filter your indoor water.
Measure the amount of line you will need to remove at your install location.
You will need enough space for the system, and any adapters, shut-off valves, bypass valves, or other
fittings you may need.
Prepare for the line to discharge water once cut. Allow the line to drain before proceeding. Make sure
the end of the line is smooth with no jagged edges after cutting.
You can mount the system to the wall at your install location, or it can stand on its frame on the floor.
If you are mounting the system off the floor make sure the wall can support the weight of the system
when full of water.
Installation