D12
EXP03C/EXP03D
EXP03C/EXP03D
Notes:
•
If no device is paired after 3 minutes, pairing mode will be cancelled and
Transmitter unit will be shut down.
•
You cannot pair the Transmitter with your mobile phone.
•
During pairing mode, the Transmitter unit should show a quick alternate red/blue
LED. Make sure that the Transmitter and Transceiver are not paired to any other
Transceiver or Transmitter respectively.
•
Please refer “
Understanding the Transmitter Unit Indicators
” on page D10 for
further information.
Music Streaming playback
You can operate and control the iPod as normal. However, there is no volume
control support from the analog output of 30-pin iPod connector interface.
Changing the volume on the iPod through the wheel control will have no effect
on the music streaming.
Resetting the Transmitter unit
This function is used to restore to factory default setting and clear all pairing
information.
1. Press the
[RESET]
switch once to perform reset function. Device will be
automatically powered off.
Notes:
• iPod will not be turned off in this case and iPod will not be reset.
• User needs to press the
[ ]
button again to restart the device.
4. OPERATIONS FOR
Bluetooth
®
AUDIO TRANSMITTER
Содержание EXP03
