USER GUIDE
RAW PRO • RAW XS
3 seconds after pressing the Function button it
becomes the fuel gauge. The colour of the button
now indicates the approximate percentage of battery
power left.
When the battery only has 5% charge remaining the
light will automatically switch to the low/flash setting
and the function button will flash red.
LED
BATTERY %
GREEN
100 - 50
AMBER
50 - 25
RED
25 - 5
RED FLASH
5 - EMPTY
SPECIFICATION & OPERATION
FUEL GAUGE FUNCTION
MODE
RED LIGHT
WHITE LIGHT
LUMENS
BURN TIME
LUMENS
BURN TIME
HIGH
50
2hrs
200
1hrs
MEDIUM
15
6hrs
50
3hrs
LOW
2
25hrs
15
10hrs
STROBE
–
–
200
5hrs
OPERATION
ACTION
SWITCH ON RED LIGHT
PRESS AND RELEASE FUNCTION BUTTON
CHANGE MODE
PRESS AND RELEASE FUNCTION BUTTON
SWITCH OFF
PRESS AND HOLD FUNCTION BUTTON
UNTIL LIGHT SWITCHES OFF THEN RELEASE
FROM OFF SWITCH ON WHITE LIGHT TO LOW
PRESS AND HOLD FUNCTION BUTTON
UNTIL WHITE LIGHT TURNS ON
FROM OFF TO SWITCH ON WHITE LIGHT TO HIGH
PRESS AND HOLD FUNCTION BUTTON UNTIL WHITE LIGHT
TURNS ON, CONTINUE TO HOLD
UNTIL WHITE HIGH IS ACTIVATED.
TO SWITCH FROM RED MODE TO WHITE LOW
PRESS AND HOLD FUNCTION BUTTON, IT WILL SWITCH OFF
AND THEN BACK ON IN WHITE
TO ENTER STROBE
PRESS AND HOLD FUNCTION BUTTON FROM WHITE MODE
UNTIL STROBE IS ACTIVATED
ATTENTION
The RAW head lamp is built to function in the harshest marine and outdoor environments. To guarantee a
watertight seal ensure the button cap is screwed down finger tight and the silicone band is covering the
charge port hole.
If the unit is being stored for long periods please ensure the battery is periodically charged fully.
Exposure Lights are very powerful lighting systems. Always take care when operating. Do not look directly
into the light. This may cause serious injury. Do not shine directly at others. Exposure Lights / Ultimate
Sports Engineering Ltd. accept no liability for any injuries or other damages arising from the use of their
product in any circumstances.
We design them. We make them. We are here to help.
If you are experiencing any problems with your Exposure Light or accessories please contact us directly at:
Service: +44 (0)1798 839300 | [email protected]
Alternatively contact your Exposure Dealer or Distributor.
Check web for details www.exposurelights.com
WARNING & WARRANTY
USB CHARGING
The function button will flash whilst charging. When the battery is fully charged the function button will turn
solid green. Charge time 1.5 hours
Fully charge your light
before
first use.
WARNING:
Ensure your light is totally dry and salt free before unscrewing the button cap
2. Unscrew Button cap until
USB charge port is visible -
around 5 rotations
NOTE:
Do
not remove the cap completely.
3. Insert the charger cable.
1. Pull back tab back towards
the button - do not remove
RAWQSGUIDE.2.indb All Pages
RAWQSGUIDE.2.indb All Pages
19/08/2020 09:18
19/08/2020 09:18
