Expolite TourLED 42 CM IP33, Руководство пользователя

Страница: 7 / 12

2.1 MOUNTING
HANGING
UPRIGHT
The fixture can be mounted in an
upright or sitting position using the
supporting brackets.
The fixture can be mounted in a
hanging position using the supporting
br ac ket .
Th e bra ck et s houl d be
se cured to the mounting trus s or
structure using a standard mounting
clamp. Please note that when hanging
the unit a safety cable should also be
used.
@ 220V: 18 units may be connected in series
@120V: 9 units may be connected in series
The LED MODULE can be mounted at any angle and in any
position. It is possible to further adjust the angle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
2.2 POWER CONNECTIONS
5 2 INSTALLATION
Note:
If the signal cable is over 60m between the DMX512 controller and fixture
or beween two fixtures, then a DMX signal amplifier is needed as well.
2 INSTALLATION
16 4 USING A DMX512 CONTROLLER
ID21
ID22
210
211
10
ID20 200 209
ID19 190 199
ID18 180 189
ID14
ID15
ID16
ID17
140 149
150 159
160 169
170 179
ID65
ID66
254
255
ID8
ID9
ID10
ID11
ID12
ID13
80 89
90 99
100 109
110 119
120 129
130 139
CHANNEL FUNCTION VALUE
ID6
ID7
60 69
70 79
Arc.1
BLUE
1
2
0 255
CHANNEL FUNCTION VALUE
3
0 255
0 255
GREEN
RED
2011.6.2 2011.6.2