Expolite Tour-Flash Pro, Руководство пользователя

Страница: 29 / 40

Choose Run Mode
The operating mode is set in menu RUN MODE . For operation on a DMX-controller DMX512 needs
to be set. For operation via ArtNet ARTNET needs to be set. In mode ARTNET2DMX the chosen
universe of the ArtNet input is sent to the XLR connectors. SLAVE sets the fixture into slave mode.
MENU
E-29
HSIC RUN MODE DMX512
ARTNET
ARTNET2DMX
SLAVE
Miscellaneous Settings
MENU
The default password is: UP - DOWN - UP - DOWN - ENTER
UPLOAD : sends the user programs to connected slave fixtures.
RESET : sets all editable settings back to factory default.
COLOR: in this submenu a colour calibration is selected or deactivated. When RGBtoW is
selected, the maximum brightness values at DMX = 255 are limited to the values set in CALIB.CCT .
When UC is selected the Uniform-Colour factory calibration is used, which adjusts devices of
different generations. If the value is set OFF , the calibration is deactivated and the device reaches
the maximum brightness.
DIMMER: controls different dim curves to simulate a halogen bulb ( DIM4/DIM3/DIM2/DIM1/OFF ).
DMX ERROR: sets how the fixture responses if DMX-signal gets lost. Set SAVE to hold the last
received value or BLACK for blackout.
PWM: gives the user the possibility to adjust the PWM frequency of the leds ( 1200HZ/2000HZ /
2400HZ / 6000HZ / 25000HZ ).
FULL POWER CCT: sets the colour temperature at maximum output. 3200K/4200K/5600K/10000K
and NORMAL can be set.
HSIC SETTING
**** ****
SEND UPLOAD
RESET
COLOR
DIMMER
DMX ERROR
****
UC
OFF
RGBtoW
DIM4
DIM3
DIM2
DIM1
OFF
SAVE
BLACK
1200HZ
2000HZ
2400HZ
6000HZ
25000HZ
3200K
4200K
5600K
10000K
NORMAL
PWM
FULL POWER CCT
RESET