25
ENGLISH
ACTIVATE THE PASSWORD
BALANCE PARAMETERS AND CORRECTION
MENU DISPLAY
3.11
3.12
Enter the¡KEY¡mode to select whether the access password is
on or off. When the fixture is set as PASS ¡ON¡, after 30 seconds
or turn on the fixture next time, the fixture will need an access
password to enter the display menu control.
NOTE: THE FACTORY ACCESS PASSWORD IS:
UP+DOWN+UP+DOWN, THEN PRESS ENTER TO CONFIRM THE
ACCESS.
Press
MENU
button to enter the password confirmation, to enter the
correct password < UP + DOWN + UP + DOWN >. Key, press the
MENU
in, the correct password will enter show submenu.
Enter the
CALIB.C
to select white color of different color tempera-
ture.There are 12 pre-programmed White colors can be edited by
using
RED, GREEN, BLUE & WHITE
.
When DMX mode is HSIC, CH5 can play 12 white color
When DMX mode is TOUR, CH6 can play 12 white color
When DMX mode is TR16, CH11 can play 12 white color
NOTE:
if CCT data is changed in WHITE from WT.01 to WT.12, CCT of
according channel will be changed also Enter the RGBWto adjust the
RGB parameter to make different whites.
When the new setting is activated, the DMX controller choose RGB =
255,255,255 the white color will be made by the actual RGB values on
the RGBW.
MENU
KEY
ON
OFF
MENU
CALIB. C
****
WT. 01
WT. 02
WT. 12
WHITE
RED
R. ( 0-255)
G. ( 0-255)
B. ( 0-255)
W. ( 0-255)
GREEN
BLUE
WHITE
RGBW
RED
R. ( 0-255)
G. ( 0-255)
B. ( 0-255)
GREEN
BLUE
INFO-MENÜ
3.13
Press
ENTER
and go to
INFO
, you can check
VERSION
.
MENU
INFO
VERSION
