Expolite led22550, Руководство пользователя

Страница: 33 / 44

MENU
Calibration and Whiteadjustment
In the menu CAL the calibrations and whiteadjustments can be set.
In the submenu CAL1 the preset colour temperatures for the white values are stored. These
are mixed from the parameters Red ( RED ), Green ( GREN ), Blue ( BLUE ) and White ( WHIT ).
In the menu CAL2 , a custom colour calibration is stored which limits the maximum
brightness of the colour channels RGB at the DMX value "255".
NOTE: The maximum value can be limited to 0. In this case, a colour channel does not respond
to a sent DMX value, which can be misinterpreted as a device error.
To reset the changes made to the colour temperature presets to factory default, the setting
CALR needs to be confirmed with the default password UP - DOWN - UP - DOWN -
ENTER.
E-33
DERR: sets how the fixture responses if DMX-signal gets lost. Set SAVE to hold the last
received value or BLAK for blackout.
SLCK: Settings Lock. In this menu is set whether the menu SET is only accesable after entering the
password ( ON ) or without a password ( OFF ).
STRB : In the menu strobe a differentiation is made between standard stroboscope CLAS and
extended stroboscope SPEC . This setting only affects the DMX personalities TOUR , AR2.S
and TR16 .
Current Software Version
When the software of the fixture is booting, the current installed software version is shown for about 5
seconds in the display.
PERSON CAL CAL1 WH.01 RED
GREN
BLUE
WHIT WH.11
o
o
o
CAL2
****
CALR CALR OK
R.(0 - 255)
G.(0 - 255)
B.(0 - 255)
W.(0 - 255)
RED
GREN
BLUE
R.(0 - 255)
G.(0 - 255)
B.(0 - 255)
CALR OK