Expolite LED Fresnel Mini HD, Руководство пользователя, Страница: 17 / 20

Setting DMX-Address
The DMX start address of the fixture is set in the menu ADDR . This is retained even when changing
the personality.
MENU
Setting DMX-Personality
MENU
The personality is set in the menu SET , submenu PERS . There are three different modes which can
be choosen: UNO (1 channel), DOS (2 channels), STD.P (3 channels).
Editing Static Scene
The intensity for stand alone use of the fixture can be set in the menu DIM. Furthermore the dimmer
can also be controlled manually via the dim-encoder above the display. To use this function the
encoder needs to be pushed twice. If dmx-signal is pending the fixture switches back to dmx control
after two minutes without using the encoder.
MENU
E-17
PERSON
HSIC ADDR D.(001 - 512)
PERSON
SET HSIC PERS UNO
DOS
STD.P
Choosing Run Mode
The operating mode is set in menu RUN . For operation on a DMX-controller DMX needs to be
set. SLAV sets the fixture into slave mode.
If the fixture shall be run and dimmed via a dimmer, the modes DMMR and SENS can be chosen.
In the mode DMMR the Fixture can be run exclusively via the dimmer. In the mode SEND the fixture
can be controlled via DMX as normal. Once the voltage is less than 80% of the normal voltage
(110V/220V) the fixture begins to dim depending on the incoming voltage. A control via DMX is not
possible in this range.
MENU
PERSON
RUN HSIC DMX
HSIC SLAV
PERSON
RUN HSIC DMX
PERSON DIM
D.(0 - 100)