EXPOL ATLAS, Руководство пользователя, Страница: 4 / 10

4
later frame assembly steps. The nut and the washer are mounted from the inner greenhouse side (under the
arc). A wrench size 10 is required for the installation. Other elements are fastened to each other using screws
with pressure pads
on the inner side of the greenhouse and using roof screws on the outer side of the
greenhouse (for attaching polycarbonate sheets). The locations and amount of the screws are shown in
Figures 1 and 2.
Attention! When assembling the end-walls, make sure that the punched holes are located on the same
side for all elements. The punched holes on the elements are used for subsequent attaching of the
polycarbonate sheets which are to be mounted on one side of each end-wall.
Figure 1 – Greenhouse frame end-wall assembly schematic (view from the inside of the greenhouse)