VIEW17
SCALE 1/2"=1'
A
C
3401 Mary Taylor Road
Birmingham, Alabama 35235
(205) 439-8200
Drawn By: AKHIII
C
O
N
N
E
C
T
O
R
S
&
A
L
IG
N
M
E
N
T
T
O
O
L
S
APPENDIX A
A
S
S
E
M
B
L
Y
IN
S
T
R
U
C
T
IO
N
S
THUMB SCREW INSTRUCTION
MQ-TSR2 / MQ-TSG1
THE 2" RED THUMB SCREW IS
USED TO CONNECT MULTIQUAD
FRAMES TO OTHER MULTIQUAD
FRAMES. EACH FRAME HAS
RIVET NUT ON ONE SIDE AND A
HOLE ON THE OTHER TO
ALLOW FRAME TO FRAME
CONNECTION
THE 1" GREEN THUMB SCREWS
ARE USED WHEN ASSEMBLING
1x4 AND 2x4 FRAMES. SEE
APPENDIX PAGES
DUE TO THE RIVET NUTS, ALL
FRAMES HAVE A LEFT AND RIGHT
SIDE. VERIFY FRAME ORIENTATION
TO ALLOW FRAME TO FRAME
CONNECTION
FRAME CLAMP INSTRUCTION
MQ-CLMP
(NOT REQUIRED IN EVERY CONFIGURATION)
THE MQ-CLMP IS A FRICTION-FIT CONNECTOR /
ALIGNMENT TOOL THAT DOES NOT REQUIRE
TOOLS. THEY ARE TO BE USED IN ABNORMAL
MULTIQUAD FRAME CONFIGURATIONS OR AS
ADDITIONAL FRAME SECURITY IN SPECIAL
SITUATIONS
(NOT REQUIRED IN EVERY CONFIGURATION)
CORNER CONNECTOR INSTRUCTION
MQ-BTW
THE MQ-BTW CORNER ALIGNMENT TOOL IS
DESIGNED TO AID IN THE ALIGNMENT OF
FRAMES AS NEEDED IN SOME MULTIQUAD
CONFIGURATIONS.
AFTER TWO MULTIQUAD FRAMES ARE SET
"CORNER-TO-CORNER" THE MQ-BTW SIMPLY
ATTACHES TO THE EXISTING MAGNETS ON
THE FRAME
CORNER
CONNECTOR
MULTIQUAD
FRAME
QUAD
