10
Power
Power
Power
Power Supply
Supply
Supply
Supply Mains
Mains
Mains
Mains
Use the provided plug to connect the main power to the projector paying attention to the voltage and frequency
marked on the panel of the projector. It is recommended that each projector be supplied separately so that they
may be individually switched on and off.
Important
Important
Important
Important
It is essential that each projector is correctly earthed and that electrical installation conforms to all relevant
standards. Power consumption of this projector is 150W@220V.
Watchdog
Watchdog
Watchdog
Watchdog system
system
system
system
When the projector is switched on the electronics performing a reset, this function moves the head to an extreme
limit point and rotates the internal Colour and gobo wheels thus allowing the microprocessor control system to
register the positions of all motor under its control. When the lamp strikes and fires up it can create some noise
within the projector that has the potential to disturb the microprocessors. This projector is fitted with an
electronic watchdog system that monitors the microprocessor and will initiate a reset if the functioning of the
microprocessor has been disturbed. This system ensures that the reset is performed successfully and once
completed the projector is ready to receive control instruction and operate without problem.
Delivery
Delivery
Delivery
Delivery
Notice
：
Open delivery lock before operation.
This is transported in carton.
Things as follows are enclosed
：
�
User manual
�
One additional fixtures
�
2.5 meters signal line
�
One safety string
Package
Package
Package
Package
1
、
Shut off the power supply and cool it.
2
、
Put the light at the bottom of the case. Do not closethe case with heavy strike.
