06
05
INSTALLATION
To Install Batteries
(Dry your hands before installation or replacing batteries.)
1. Remove battery cover;
2. Insert four (4) AA batteries into their appropriate slots, with proper orientation, as indicated
on the battery compartment;
3. Replace battery cover.
To Attach Flexible Tube with Handle
To connect the flexible tube camera with control
handle, first make sure that the keyed end of the
tube is aligned with the slot in the handle, then
use slight force to push them together. Once
properly aligned, twist the treaded knob clockwise
until the connection is securely in place.
Fasten the treaded knob
Keyed end plugs into socket
To connect the extension tube, first align the keyed end with the slot in the
handle. Use slight force to push them together. Once properly aligned, twist
the treaded knob clockwise until the connection is securely in place. Repeat
this process to connect the other end of extension tube to flexible camera
tube.
To Install Extension Tube
To Install Accessories
The three (3) included accessories (mirror, hook and magnet) are all attached to the camera in the
same way as illustrated below:
For GL8822: to prepare accessory for installation, push down on stem-side of black interface
while pulling away from adjacent side. This will open the base of the accessor y. Next, align inside
of stem-side to either treaded surface at the base of camera head. Tighten to secure the
accessory in place.
Click to lock up
Aim at the cut of slot
Wear the rubber ring
Hook the hole
For
GL8822
For
GL8823
SD card
To Insert SD Card
After SD card is inserted into SD card slot successfully, an SD card
icon will appear on the monitor screen; otherwise, the ‘no SD
card’ icon will show.
NOTE:
If the device fails to read the TF card due to late insertion or
some problem of the TF card, the screen displays "FORMAT TF CARD".
If the TF card is in normal condition, press OK; otherwise, press YES
to format the TF card.
CD driver( G )
3.5 Floppy Disk( A )
Mobile Disk( H )
To Connect USB Cable
Use the provided USB cable to connect the product to any PC with a
USB slot. Your computer should automatically recognize the new
hardware, which you may browse by double-clicking on the My Computer
icon on your desktop, and then navigating into the Mobile Disk directory.