1. Press and hold [ + ] button to enter alert setting
mode.
2. The setting parameter will flash.
3. Press [ + ] or [ - ] button to set the desired data.
4. Press [ MODE ] to confirm setting and enter to
next parameter.
5. Sequence of setting: Upper limit On/Off > Upper
alarm temperature > Lower limit alarm > Exit
6. If there is no action in 20 seconds, the setting
will be saved and you will exit the setting mode.
Temperature Alert Operation
1. When the temperature alert is turned on, the
display shows [ ].
2. When the measured temperature is greater than
the set upper limit or lower than the set lower
limit,
the alert [ ] or [ ] will flash on
the display respectively (no sound).
3. To turn on/off the alert, press and hold [ + ].
TEMPERATURE ALERT
formation. In this case, the mould alert red LED
blinks every 2 seconds and the risk of mould
symbol [ ] appears.
Press any key to return to stop the red LED alert
signal. The risk of mould symbol [ ] is
displayed until the measured humidity value falls
below the predefined values as below.
Low risk
Medium risk
High risk
MOULD WARNING
60-64 65-69 70-74 75-79 80-84 85-89 90-94 95+
30
29
28
27
26
25
24
23
22
21
20
Te
m
pe
ra
tu
re
(
°C
)
Humidity (%)
When the humidity exceeds certain value at
certain temperature, there is a risk of mould
8
