Exploranium KT-9, Руководство пользователя, Страница: 23 / 88

15
Configuring for right or left-handed use
To make the KT-9 fully adaptable to your way of working in the
field, it can be set to operate in either a
right or left -handed
mode. This means that the main measurement functions, i.e.
the button you would press most often, can be re-mapped to be
activated on either the right or left
side of the KT-9.
Whenever a re-mappable button is referred to in the following
documentation, it will be described from a
right-handed opera-
tions point of view, unless specified otherwise. The special icons
shown in the margins will be used to highlight a
right or left re-
mapped button respectively.
To change from right to left-handed usage:
1 The display in the measurement mode will have a
r:
as the
first character, e.g.
2 Press the L
EFT
button twice to get to the
C:
menu. Please
also refer to Figure 4 on page 14 to see the flow of events.
3 Press the
R
IGHT
button once to toggle to the left-handed
mode. You should now see the following display:
4 Press the L
EFT
button again to get back to the measure-
ment mode.
To change from left to right-handed usage:
The steps in the previous description need to be repeated,
except that you will be pressing the opposite button.
r:nP
C: LH
15
Configuring for right or left-handed use
To make the KT-9 fully adaptable to your way of working in the
field, it can be set to operate in either a
right or left -handed
mode. This means that the main measurement functions, i.e.
the button you would press most often, can be re-mapped to be
activated on either the right or left
side of the KT-9.
Whenever a re-mappable button is referred to in the following
documentation, it will be described from a
right-handed opera-
tions point of view, unless specified otherwise. The special icons
shown in the margins will be used to highlight a
right or left re-
mapped button respectively.
To change from right to left-handed usage:
1 The display in the measurement mode will have a
r:
as the
first character, e.g.
2 Press the L
EFT
button twice to get to the
C:
menu. Please
also refer to Figure 4 on page 14 to see the flow of events.
3 Press the
R
IGHT
button once to toggle to the left-handed
mode. You should now see the following display:
4 Press the L
EFT
button again to get back to the measure-
ment mode.
To change from left to right-handed usage:
The steps in the previous description need to be repeated,
except that you will be pressing the opposite button.
r:nP
C: LH