4
Igniting channels over 20
To ignite the channels 21-70, simply press Button 5 after igniting the channels 16-20. Once this is done, every further push of button 5 ignites a single channel from 21 up to 70.
Страница 1: ...n Explo Zündtechnik Tx 20K Manual Explo Zündtechnik Harald Kulterer Völkermarkterstrasse 240 A 9020 Klagenfurt Tel 43 0 463 32 2 45 Fax 43 0 463 32 2 45 75 Mobil 43 0 664 51 007 51 www explo at office explo at ...
Страница 2: ...Power supply 9V Block battery Stand by 10 h Transmission Range 150 m Temperature Range 25 C to 75 C Battery control Integrated antenna Armed LED Battery LED Ignite Channel 1 Ignite Channel 2 Ignite Channel 3 Ignite Channel 4 Ignite Channel 5 Test Armed 1 Armed 3 Test Armed 4 Armed 2 ...
Страница 3: ...vice The number of the pushed ignition button is the new box number The red LED should now flash indicating the new box number Attention If you hold the Armed 1 and Armed 4 Button down while switching on the device the signal is sent to all boxes The RED is flashing once for a longer time then Testing After switching on the device you can send a test signal by pushing the Armed 1 and Armed 4 Butto...
Страница 4: ... Igniting channels over 20 To ignite the channels 21 70 simply press Button 5 after igniting the channels 16 20 Once this is done every further push of button 5 ignites a single channel from 21 up to 70 ...
