How To Connect And Operate your
LiFePO4 Smart Charger
3
or
CHAR
GE
CHAR
GE OK
ST
ATUS DISPLA
Y
Finished Charging
Charging
(When Connected)
LED
LED
LED
Power on - Idle
4
2
1
CHAR
GE
CHAR
GE OK
ST
ATUS DISPLA
Y
Choose either Alligator Clips or Bolt -Screw Wire cord
and connect one to your Smart charger. Insure that
the two alligator clips and or ends of Bolt screws are
separated, not touching each other, and that they are
not touching any foreign metal objects or near
flammable materials.
Before Starting
Connecting to Battery
1
3
Make sure that you are charging the correct battery
type for this charger. For Bolt-Screw Connectors,
unscrew the terminal bolts before starting.
First, connect the
BLACK
Alligator Clip or Bolt-Screw
Connector to the
Negative (–) Terminal
.
Then, connect the
RED
Alligator Clip or Bolt-Screw
Connector to the
Positive (+) Terminal
.
LED
will turn
RED
to indicate charging is starting.
Once you’ve followed the precautions on step 1, plug
the AC cord directly to your AC wall outlet. The
LED
will light up
Green
when connected to the outlet.
Please read Warnings and Safety on other side of this
manual if you plan on using an extension cord.
Connecting to AC Power
Charging The Battery
2
4
The Smart Charger automatically implements the 0V
reset if necessary and the special 2-stage constant
current/constant voltage (CC/CV) charge algorithm.
The LED indicator will track its progress. When
LED
turns
Green
your battery has finished charging.
DO NOT LEAVE UNATTENDED.
Disconnect charger
from battery first then unplug from the wall outlet.
(562) 630 - 3002
Visit us at:
ExpertPower.us
6437 Alondra Blvd
Paramount, CA 90723
For Questions
And Support
Operation Instructions
