37
Hyper Terminal for COM Port
Initiate another Hyper Terminal as a COM Port Terminal (in Figure 4.3,
select COM 1 or other COM port instead of “TCP/IP (Winsock)”). Set the
COM port Properties to be the same as those set for the Serial Port of the
converter ( 9600.N.8.1 ).
(Figure 4.3)
Data Transmission
When all steps described above are finished, type any characters on the
COM Port Terminal and check if the typed characters are also displayed on
the TCP/IP Winsock Terminal. Alternatively, check if the characters typed
on the TCP/IP Winsock Terminal are also displayed on the COM Port
Terminal. If yes, then all settings are correct and the converter can operate
properly.
