Expert Electronics MB1, Руководство пользователя

Страница: 98 / 192

98
MB1 User Manual
© 2016 Expert Electronics
MAIN SCREEN DESCRIPTION
For t he but t ons - available the following functions:
·
Unused – button is unused.
·
Band Up/Down – band switching.
· Mode Up/Down – mode switching.
·
Volume Up/Down – volume adjustment.
· Mut e – switch off sound.
·
BI N – enable/disable binaural mode.
·
NR – enable/disable noise reduction.
· ANF – enable/disable analog pick filter.
·
NB1 – enable/disable noise blanker 1.
·
NB2 – enable/disable noise blanker 2.
· Filt er Up/Down – receiver's filter switching.
·
SQL – enable/disable squelch.
· PA – enable/disable power amplifier.
·
AG C Up/Down – AGC type switching.
·
Preamp Up/Down – preamp or attenuator level switching.
· St ep Up/Down – tuning step adjustment.
·
Zoom I n/Out – spectrum zoom modes switching.
·
MOX – enable/disable manually operated transmit mode.
· Tone – enable/disable tone signal in TX mode.
·
WF - enable/disable Wide Filter. Filter for all Nyquist zone. If in the Device menu settings you
set Aut o enable checkbox, then you don't need this function on the panel.
· Power ON/OFF – transceiver's power on/off.
·
Swit ch DDS/I F – tuning the frequency by moving the filter over the panorama, in other words
changing the digital IF, or when filter stands still and spectrum moves, this is the central
frequency tuning.
· Swit ch Receiver – switching between software RX1 and RX2. Main knob will tune the
frequency of one of the receivers.
·
Change VFO A/VFO B – switching between VFO A and VFO B.
· On/Of f Sub RX – enable/disable SubRX.
·
RI T On/Of f – enable/disable RIT offset.
·
RI T Reset – reset RIT offset to 0.
· I F as RI T – tune the RIT offset by moving the filter over the panorama.