Pairing to IRiS Listeners
This procedure is split into 2 sections, one for those who do not have an IRiS Master Pairer and for
those who do.
Without an IRiS Master Pairer
Every IRiS Listener has a button on it called a pairing button. To get the IRiS Colour Selector Deluxe
to work with a product, first decide which product you want to control then find the pairing button
on that product and press it. You then need to press any switch on the IRiS Colour Selector Deluxe
within 5 seconds. The IRiS Listener will now change colour every time you press a button on the IRiS
Colour Selector Deluxe, if correctly paired.
With an IRiS Master Pairer
To get the IRiS Colour Selector Deluxe to work with a product, first decide which unit you want to
control and find its pairing button on the IRiS Master Pairer and press it. You then need to press any
switch on IRiS Colour Selector Deluxe within 5 seconds. The IRiS Listener will now change colour
every time you press a button on the IRiS Colour Selector Deluxe, if correctly paired.
Charging the IRiS Colour Selector Deluxe
1. Plug the USB lead into the wireless charging pad.
2. Plug the other end of the USB into the correct power supply.
3. Plug the power supply into a mains socket outlet and switch on at the mains. The charging pad
LED should now light up.
4. Position the controller over the charging pad so the charging pad is underneath the centre.
5. The charging light on the controller should light up when it is correctly positioned over the
charging pad.
6. Leave the controller charging until the LED turns off. Once the light goes off, the unit will be fully
charged.
The battery takes approximately three and a half hours to fully charge from being fully discharged.