DESCRIPTION
1.
Attachment Shaft
2.
Blade
3.
Blade Guard
4.
Gear Head
5.
End Cap
6.
Knob
7.
Coupler
8.
Guide Recess
9.
Positioning Hole
10. Upper Flange Washer
11. Cupped Washer
12. Blade Nut
13. Spanner
14. Holding Pin
15. Hanger Cap
16. Button
17. Second Hole
ASSEMBLY
JOINING THE POWER HEAD TO THE
STRAIGHT SHAFT TRIMMER ATTACHMENT
(Fig. 1 & 2)
WARNING
Never attach or adjust any attachment while
power head is running. Failure to stop the engine
may cause serious personal injury.
The straight shaft trimmer attachment connects to the
power head by means of a coupler device.
■
Loosen the knob (6) on the coupler (7) of the power
head shaft and remove the end cap (5) from the
attachment shaft.
■
Push in the button located on the attachment shaft.
Align the button with the guide recess (8) on the
power head coupler and slide the two shafts together.
Rotate the attachment shaft until the button locks into
the positioning hole (9).
ASSEMBLY
2
English
SYMBOLS
Important:
Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOLS
NAME
EXPLANATION
Safety Alert Symbol
Indicates danger, warning or caution. it means attention!!!
Your safety is involved.
Read Your Operator's Manual
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satification and safe use.
Wear eye and hearing protection
Wear eye, and hearing protection when operating this
equipment.
Keep bystanders away
Keep all bystanders at least 15m (50 ft) away.
Ricochet
Danger of Ricochet.
Do not use toothed blade
This unit is not intended for use with a toothed saw type blade.
ABC-03_Eng.qxp 5/19/2004 8:15 AM Page A5
