- -
10
CONNECTING THE AC ADAPTER
1. Remove the PCMCIA interface card or Parallel Port connector from your
computer.
2. Connect the AC adapter plug to the DC-IN jack at the CD-ROM rear
panel.
3. Attach the AC adapter to the AC outlet.
INSTALLING THE BATTERIES
The CD-ROM requires six AA size batteries (not included) for operation. The
Alkaline batteries may last longer than other batteries. You may also use Ni-
Cad rechargeable batteries, which have a shorter service life. Neither the
rechargeable batteries nor the charger is provided with this package.
Follow the instruction below to install the
batteries,
1. Remove the disc from the CD-ROM.
2. Disconnect the PCMCIA interface card
from your computer, and disconnect the
AC adapter from the “DC-IN” jack.
3. Turn over the CD-ROM drive and place
it horizontally.
4. Press and slide the battery lid in the
direction of the arrow to remove it.
Figure 5
5. Install six fresh AA batteries (as shown in Figure 5), and make sure the
polarities match the diagram.
6. Replace the battery lid.
