Exonic EXDTV-100, Инструкция по эксплуатации

Страница: 8 / 12

6
Install instruction
15
1.For car use: Connect the BATT wire to car battery and connect ACC wire to
car ACC switch.
2. Upgrade port is used for factory testing purpose only.
This port is not used during install.
3.GND ( ) must connect to ground or battery- .
4.DC output ground, connect to the device GND with which use the DC +12V-24V
output.
1
ANT IN V
1
V
2
V
3
L R
VIDEO OUT AUDIO OUT
TV/MONITOR
BATT,+12~24VDC Power supply input(Yellow)
3.15A FUSE
2.5A FUSE
ACC, Car Engine Key(Red)
GND,Power Supply ground(Black)
Output GND, DC output ground( Brown)
DC OUT +12~24VDC, (Blue)
2.5Amp output
FRONT
REAR
DC
IN/
OUT
ACC GND
OUT
+12V-24V
OUT
+12V-24V
IN
POWER LED
IR RECEIVER
VIDEO INPUT
AUDIO INPUT
（ ）
L/R
EXTENSION IR
VIDEO IN UPGRADE IR IN
V L R
IR POWER AUDIO IN
UPGRADE PORT
Figure 19-RRT Setting menu
RRT Setting
Dimension Name 1
Dimension Name 2
Dimension Name 3
Dimension Name 4
Note: blocking a rating affects all the higher ratings, so that
blocking "13 ans+" in the example above automatically
blocks "16 ans+"and "18 ans+", whatever previous state
of these ratings was. If a password is defined while a TV
program warning is received for the current channel,
sound is muted and the following menu is displayed on the
center of screen; what's more, the rating information should
be consistent with current active program rating.
This Channel is blocked by the French
Canada Rating of "G"
1. RRT Setting:
Enter Rating Value setting in current
dimension Name.
Figure 20-Rating Region Dimension menu
Dimension Name1
Rating V alue 1 B
Rating V alue 2 B
Rating V alue 3 B
Rating V alue 4 B
1. Rating value Setting:
Set Block or View in current Rating
Value.
RRT Setting
Rating value Setting
Canada Ratings