Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 5 hours
• Change the engine oil.
After the first 250 hours
• Change the hydraulic filter.
Before each use or daily
• Check the engine oil level.
• Check the mower blades.
• Check for loose hardware.
• Grease the caster wheel bearings.
• Grease caster pivots.
• Check the safety interlock system.
• Clean the grass and debris build-up from the machine and cutting deck.
• Clean the engine and exhaust system area.
• Clean engine air cooling system (See Engine Owner's Manual)
• Clean the grass build-up from under the deck.
Every 25 hours
• Service the foam element. (May need more often under severe conditions. See the Engine
Owner's manual for additional information.)
Every 40 hours
• Check the hydraulic oil level.
• Check the tire pressures.
• Check the condition of the belts.
• Grease the pump drive idler pivot.
• Grease the pump control bearings.
• Grease the mower deck idler pivot
Every 80 hours
• Remove engine shrouds and clean cooling fins.
Every 100 hours
• Service the paper element. (May need more often under severe conditions. See the Engine
Owner's manual for additional information.)
• Change the engine oil. (May need more often under severe conditions.)
Every 160 hours
• Check the spark plugs.
Every 200 hours
• Replace the paper element.
Every 500 hours
• Change the hydraulic filter (Every 250 hours/yearly if using Mobil 1 15W50)
• Replace the emissions air intake filter.
Monthly
• Grease the PTO engagement bellcrank.
Periodic Maintenance
Engine Maintenance
Important:
Refer to the Engine Owner’s Manual
for additional maintenance procedures.
Engine Safety
WARNING
The engine can become very hot, especially the
muffler and exhaust components. Touching a
hot engine can cause severe burns.
Allow the engine to cool completely before
service or making repairs around the engine area.
Do Not change the engine governor setting or
overspeed the engine.
22
Содержание VIKING 346
Страница 1: ...VIKING For Serial Nos 408 644 346 Higher Part No 4505 182 Rev A ...
Страница 45: ...Schematics g010189 45 ...
Страница 47: ...47 ...