MODEL
NUMBER
LENGTH
HEIGHT
WIDTH
ENGINE
SIzE
DECK
WEIGHT
PLATFORM
UP
PLATFORM
DOWN
DEFL. DOWN DEFL. UP
VT18KA363
1
18 hp Kawasaki
®
V-Twin
36"
UltraCut
™
Series 3
800 lbs
61.5"
74.0"
51.5"
39.1"
48.0"
VT20KA484
20 hp Kawasaki V-Twin
48"
UltraCut Series 4
838 lbs
59.0"
74.0"
50.0"
59.6"
51.8"
VT24KA484
1
24 hp Kawasaki V-Twin
48"
UltraCut Series 4
855 lbs
59.0"
74.0"
50.0"
59.6"
51.8"
VT24KA524
1
24 hp Kawasaki V-Twin
52"
UltraCut Series 4
866 lbs
59.0"
74.0"
50.0"
64.8"
56.3"
VT25EKC524
25 hp Kohler
®
EFI
52"
UltraCut Series 4
875 lbs
59.0"
74.0"
50.0"
64.8"
56.3"
P
OWER
C
OMPONENTS
ENGINE
18, 20, and 24 hp Kawasaki V-Twin, governed to 3,600 rpm and 25 hp Kohler Electronic
Fuel Injection (EFI) governed to 3,600 rpm.
DRIVE SYSTEM
Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
SPEED
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4
kmph) reverse.
PTO ENGAGEMENT
Electromagnetic clutch.
FUEL CAPACITY
8-gallon, (30.2-L) single fuel tank with single fill locations.
DRIVE-WHEEL RELEASE
Standard. Allows unit movement without engine running.
SAFETY PACKAGE
Operator Presence Controls (OPC).
DECK LIFT
Standard. Mechanical lift-assist spring.
DECKS
STYLE
UltraCut Series 3 on 36" unit and UltraCut Series 4 on 48" and 52" units. Side discharge
standard with the option to bag or mulch.
WIDTHS AVAILABLE
36," 48," and 52" 10-gauage top that is formed and continuously seam-welded, 7-gauge side
skirt and 7-gauge formed and welded spindle mounting locations for improved strength and
reduced weight. 4-point suspension with mechanical-spring deck lift.
CUTTING HEIGHT
1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator
position.
BLADE-TIP SPEED
Approximately 18,500 fpm.
EQUIPMENT
TRACTOR FRAME
Welded, 1.5" x 3" tubular steel frame.
STEERING AND MOTION CONTROL
Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also
adjustable to 3-height positions.
SUSPENSION PLATFORM
Self-compensating elastomeric suspension. Stowable operator platform.
CASTERS
.38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
FRONT CASTER TIRES
11 x 4.0-5, smooth-tread, semi-pneumatic.
DRIVE TIRES
18 x 8.5-8 Kenda Tires on 36" unit.
20 x 10.0-8 Turf Master
®
drive tires on 48" and 52" units.
TURNING RADIUS
True zero-turn.
PARKING BRAKE
Lever-actuated bar brake.
BLADE SPINDLES
No maintenance, sealed and non-greassable spindles. 7.75" diameter cutter housing with
1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
ENGINE OIL
Exmark 4-Cycle Premium Engine Oil.
HYDRAULIC FLUID
Exmark Premium Hydro Oil.
ELECTRICAL
12-volt battery with 15-amp alternator except EFI units has 20-amp alternator.
ENGINE HOURMETER
Standard.
vantage
™
speCifiCations
exmark.com
EXMARK MANUFACTURING COMPANY INC.
•
2101 ASHLAND AVENUE
•
P.O. BOX 808
•
BEATRICE, NE 68310-0808
•
CALL 402.223.6300
•
FAX 402.223.6384
BEst-sElling Brand of mowing EquipmEnt for thE landscapE profEssional.
Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right
to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligations. See your dealer for details on all of our warranties.
Exmark
®
is a registered trademark, and Vantage
™
& UltraCut
™
are trademarks of Exmark Mfg. Co., Inc. ©2011 Exmark Manufacturing Company, Inc. All Rights Reserved. Printed in the U.S.A. 2011.
1
Units are carb-compliant.
