Exmark ULTRA VAC UVD60, Руководство оператора

Страница: 15 / 28

Operation
Figure 7
1. Clevis Pin 2. Hairpin
11. Units with removable floorpan weight:
Tighten knob on weight assembly until the weight
is clamped securely to the caster arm.
12. Hook weight plate assembly over the top of the
weight mounting plates and secure with two
hairpins as shown in Figure 8).
Figure 8
1. Weight Plate Assembly 2. Hairpin
Note:
The portions of the Ultra Vac collection
system that are not bolted to the mower are
designed to be installed or removed in their
entirety. Do Not operate the mower with only a
portion of the Ultra Vac installed.
Transporting
Transporting a Unit
Use a heavy-duty trailer or truck to transport the
machine. Lock brake and block wheels. Securely
fasten the machine to the trailer or truck with straps,
chains, cable, or ropes. If possible, both front and
rear straps should be directed down and outward
from the machine. Be sure that the trailer or truck
has all necessary lighting and marking as required by
law. Secure a trailer with a safety chain.
CAUTION
This unit does not have proper turn signals,
lights, reflective markings, or a slow moving
vehicle emblem. Driving on a street or roadway
without such equipment is dangerous and
can lead to accidents causing personal injury.
Driving on a street or roadway without such
equipment may also be a violation of State laws
and the operator may be subject to traffic tickets
and/or fines.
Do Not drive a unit on a public street or roadway.
WARNING
Loading a unit on a trailer or truck increases
the possibility of backward tip-over. Backward
tip-over could cause serious injury or death.
• Use extreme caution when operating a unit
on a ramp.
• Use only a single, full width ramp; Do Not
use individual ramps for each side of the unit.
• If individual ramps must be used, use enough
ramps to create an unbroken ramp surface
wider than the unit.
• Do Not exceed a 15° angle between ramp and
ground or between ramp and trailer or truck.
• Avoid sudden acceleration while driving unit
up a ramp to avoid tipping backward.
• Avoid sudden deceleration while backing unit
down a ramp to avoid tipping backward.
Loading a Unit
Do Not transport the unit with the hopper full.
Empty the hopper before attempting to load unit
on trailer or truck. This will reduce the chance
of rearward tip up.
Use extreme caution when
15