background image

- 42 -

10. WARRANTY

Limited Warranty

Exmark Commercial Turf Equipment

Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty Company, pursuant to an agreement
between them, jointly warrant on the terms and conditions herein, that we will repair, replace or
adjust any part manufactured by Exmark and found by us (in the exercise of our reasonable
discretion) to be defective in factory material or workmanship.

This warranty is limited to one year from the date of original retail purchase (90 days for rental use)
for any Exmark mower that is used for commercial or any other income producing purpose. The
blade spindle assemblies will be warranted for three years, one year parts and labor with an
additional two years parts only, from date of original retail purchase against defects in materials or
workmanship. The frame and hydrostatic traction drive system, excluding hoses, will be warranted
for two full years from date of original retail purchase against defects in materials or workmanship.
We will extend the Peerless 5-speed transmission manufacturer's warranty from 90 days to one
year. Belts and tires are warranted for 90 days against defects in materials or workmanship.

The engine warranty is covered by its respective engine manufacturer.  Please refer to the engine
manufacturers warranty statement that is included in the literature packet.  We are not authorized
to handle warranty adjustments on engines.  Engine warranties should be referred to the nearest
authorized service outlet of the engine manufacturer.

This warranty extends only to the original retail purchaser of the equipment.  This warranty may
not be assigned or transferred without the prior express written consent of Exmark and Exmark
Warranty Company.  The warranty period commences upon the date of the original retail purchase.

The Exmark turf equipment, including any defective part, must be returned to an authorized Exmark
service dealer within the warranty period. The warranty shall extend to the expense of repair or
replacement (as determined by us) of the defective part, including labor.  The warranty shall not
extend to the expense of delivering the mower to the dealer for warranty work nor the expense of
returning it back to the owner after repair or replacement.  Our responsibility in respect to claims is
limited to making the required repairs or replacements, and no claim of breach of warranty shall be
cause for cancellation or rescission of the contract of sale of any Exmark mower.  Proof of
purchase may be required by the dealer to substantiate any warranty claim. All warranty work must
be performed by an authorized Exmark service dealer.

This warranty extends only to turf equipment operated under normal conditions and properly serviced
and maintained.  The warranty expressly does not cover: (i)  any damage or deterioration due to
normal use, wear and tear, or exposure; (ii)  normal maintenance services, such as oil change,
cleaning, lubrication; adjustment; (iii)  replacement of service items, such as oil, lubricants, spark
plugs, or other items subject to normal service replacement; (iv)  damage or defects arising out of or
relating to misuse, neglect, alteration, negligence or accident; (v)  repair or replacement arising from
operation of or use of the turf equipment which is not in accordance with operating instructions as
specified in the operator's manual or other operational instructions provided by Exmark; (vi)  repair or
replacement arising as a result of any operation from turf equipment that has been altered or
modified so as to, in the determination of Exmark or Exmark Warranty Company, adversely affect the
operation, performance or durability of the equipment or that has altered, modified or affected the turf
equipment so as to change the intended use of the product; (vii)  repair or replacement necessitated
by use of parts, accessories or supplies, including gasoline, oil or lubricants, incompatible with the
turf equipment or other than as recommended in the operator's manual or other operational
instructions provided by Exmark; (viii)  repairs or replacements resulting from parts or accessories
which have adversely affected the operation, performance or durability of the turf equipment; or (ix)
damage or defects due to or arising out of repair of turf equipment by person or persons other than
an authorized Exmark service dealer or the installation of parts other than genuine Exmark or Exmark
recommended parts.

Содержание Turf Tracer HP TT3615KA





















































Отзывы: