Maintenance
CAUTION
Raising the machine for service or
maintenance relying solely on mechanical
or hydraulic jacks could be dangerous. The
mechanical or hydraulic jacks may not be
enough support or may malfunction allowing
the machine to fall, which could cause injury.
Do not rely solely on mechanical or hydraulic
jacks for support. Use adequate jack stands
or equivalent support.
•
Carefully release pressure from components with
stored energy.
•
Keep hands and feet away from moving parts.
If possible, Do Not make adjustments with the
engine running. If the maintenance or adjustment
procedure requires the engine to be running and
components moving, use extreme caution.
WARNING
Contact with moving parts or hot surfaces
may cause personal injury.
Keep your fingers, hands, and clothing clear
of rotating components and hot surfaces.
•
Check all bolts frequently to maintain proper
tightness.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 5 hours
• Change the engine oil.
After the first 100 hours
• Check the wheel hub torque specification.
• Check the wheel lug nuts.
After the first 250 hours
• Change the hydraulic filter and fluid.
Before each use or daily
• Check the engine oil level.
• Check the mower blades.
• Check the safety interlock system.
• Check for loose hardware.
• Clean the grass and debris build-up from the machine and cutting deck.
• Clean the engine and exhaust system area.
• Clean the grass build-up from under the deck.
Every 25 hours
• Service the foam element. (May need more often under severe conditions. See the Engine
Owner's manual for additional information.)
Every 50 hours
• Check the hydraulic oil level.
• Check the tire pressures.
• Check the condition of the belts.
• Check spark arrester (if equipped).
Every 80 hours
• Remove engine shrouds and clean cooling fins.
Every 100 hours
• Service the paper element. (May need more often under severe conditions. See the Engine
Owner's manual for additional information.)
• Change the engine oil. (May need more often under severe conditions.)
Every 160 hours
• Check the spark plugs.
Every 200 hours
• Replace the paper element.
Every 500 hours
• Change the hydraulic filter and fluid (Every 250 hours/Yearly if using Mobil 1 15W50)
• Check the wheel hub torque specification.
• Check the wheel lug nuts.
Yearly
• Grease the deck belt idler pivot.
27
Содержание STARIS E Series
Страница 1: ...STARIS E SERIES For Serial Nos 406 294 345 Higher Part No 4504 758 Rev A ...
Страница 48: ...Schematics Hydraulic Diagram g270319 48 ...
Страница 50: ...Service Record Date Description of Work Done Service Done By 50 ...
Страница 51: ...51 ...