Exmark STANDON, Руководство оператора

Страница: 11 / 20

Operation
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Pre-Start
1. Make sure you understand the controls, their
locations, their functions, and their safety
requirements.
2. Practice operating the machine without the
StandOn until familiar with the controls.
3. Practice operating the machine with the StandOn
attached on large, open, level terrain with no
obstacles present before use. The StandOn will
affect the machine operation, especially on slopes,
when turning, and when stopping.
4. Ensure the drawbar assembly is securely
connected to the mount plate.
5. For operators over 250 lb, it is recommended to
use pneumatic tire assembly, P/N 103-3798.
Operating Instructions
Operating
DANGER
If the StandOn rotates beyond 90°, there is
a potential crushing hazard. Rapid rotation
beyond 90° can cause the StandOn to jackknife
into the mower engine deck and cause serious
injury.
• Dismount the StandOn and place in transport
position before operating in reverse.
• Reduce speed when making sharp turns and
operating on slopes.
1. Use care when turning to ensure that you Do Not
swing yourself and the sulky into obstacles.
2. When turning, lean forward and toward the
direction of the turn to help in keeping balance.
Transporting
Transporting a Unit
Use the two platform side handles to lift and rotate
the StandOn into transport position, if applicable,
when loading a unit on a trailer, unloading a unit from
a trailer, or operating in reverse (see Figure 6).
CAUTION
Fingers may be pinched when lifting and rotating
the platform.
Always use platform side handles to lift and
rotate StandOn.
Figure 6
1. Latch
2. Rotate platform into transport position and lock with latch
3. Platform side handles
11